Building a DIY greenhouse can be a satisfying experience — it may also prove frustrating. A do-it-yourselfer will probably find that; building a homemade greenhouse will be less expensive than buying a prefabricated house: you can use inexpensive building materials; you can incorporate salvaged items into the design; and your labor is free.
Doing it yourself allows you to make your greenhouse any size you want. You are free to use new materials and innovative designs. You will also be able to customize the interior space to fit your needs. But, remember that you may need a construction permit to erect your own DIY greenhouse. Be certain to check before building.
Building a greenhouse is much like building any other structure. You should work from the ground up and from the outside in, starting with preparation of the site und finishing with completion of the interior details of the greenhouse.
Your initial task will be preparing the greenhouse site. When the ground is leveled, you can put in the foundation and a drainage system, if needed. Utilities hookups and plumbing can be installed at the same time. If portions of the work will be done by contractors, find out from them at what point in the construction their particular project should be done; then schedule your time accordingly. If you’re going to pour a concrete floor, try to do it before the walls are up. Once the site is ready, you can begin the actual construction of the greenhouse.
A foundation is usually constructed below or at ground level, and it forms the base upon which the greenhouse rests. Manufacturers of prefabricated greenhouses rarely include the foundation in their kits, but they will usually recommend specifications. The cost will depend on the type of foundation, as well as the building materials you select.
In cold climates, a complete foundation that extends into the ground to a depth below the frost line is usually recommended. This keeps the greenhouse from shifting or heaving during a harsh season.
Common materials for greenhouse foundations are wood, concrete, brick, concrete building blocks, stone, and metal. Any of these can form an adequate base, but check building codes for approved materials — in some areas, wood-to-ground contact is not allowed.
It’s advisable to install a. drainage system at the same time: you put in the foundation. If you have a complete foundation, you can dig a trench around the perimeter for drain tiles or just the trench with gravel. In mild climates where you don’t have a complete foundation, a gravel-filled trench can double as greenhouse base and drainage system.
The life expectancy of a greenhouse depends greatly on the strength and durability of its frame. The framework shapes and supports the structure and holds the wall and ceiling coverings in place. Several kinds of building materials are currently being used as greenhouse frames; the ones most commonly used are various kinds of metal, wood and plastic. The major differences are in cost, durability, and maintenance. Choose the material with most of the qualities that count in your particular situation.
Similar Posts: DIY Greenhouse Plans, DIY Greenhouses Design, DIY Mini Greenhouse, Cheap Solar Greenhouse DIY